A monogram is a design that can make you stand out of the crowd and represent your very own unique taste. A monogram constitutes one or more than one letter that distinguishes it from any other brand. Accessories and clothes of almost every kind of can have a monogram on them. Dresses, T-shirts, shirts, bags, pants, hoodies and almost every type of them can have it on.
Having an embroidery machine makes it a lot easier to make a monogram. However, it can be a little bit difficult but it may do so with a regular sewing machine.
Things you may need
In order to make a monogram with a regular sewing machine, it is necessary to keep in mind that it could be time-consuming. As a result, patience is a must. It is essential to have a machine that is good in quality. To create a monogram few things might be needed, like:
- The fabric you want to make monogram on
- The design of your monogram
- Pen or pencil
- Spray on
- Bobbin
- Embroidery scissors
- Embroidery needle and thread
The Process
Following the process accordingly can make it a lot easier as well as practical to make monograms with a professional touch using your regular sewing machine.
Preparing the fabric
For the monogram to sit well on the fabric, it is mandatory to prepare it well. To avoid the fabric to wrinkling after monogramming it is important to wash it before starting unless it is only suitable for a dry wash. In the case of fabrics that require dry wash, prepare it following the instructions as labeled. Washing the fabric prevents it from getting shrunk.
A perfect plan shows the way
Pre-planning your monogram is the best way to reflect your taste. Make a design that makes your imagination come into reality. Create a monogram on a foundation paper or print it. You can also use pens, pencils or tailor’s chalk. Having an outline of your desired monogram leads you to the right path.
Transferring properly
Your desired monogram will not be appropriately placed on the fabric unless you transfer it in the right way. Maintain the wrong side of the fabric with a stabilizer or a spray-on. After that, lay the fabric over the stabilizer and press using your fingers.
Prepare the machine
A well-prepared machine can make the job way more comfortable to do. Put the pressure foot lever on the upper side of the machine. Place the hoop right under the needle, insert the proper needle for embroidery, insert the needle, as well as the bobbin with the thread.
Get into the work
After all the steps have been followed accordingly, your machine is ready to do its work. Place the needle in the right position and sew a few stitches back and forth to lock. Have a firm grip on the hoop. Adjust the stitch width by moving the hoop.
Follow your planned pattern and sew a few stitches slowly. Leaving a thread tail to tie off end helps to prevent getting stuck while back stitching. Don’t forget to give them a check every now and then. Completing with the first initial, its time to move to the second. But before that, you need to put the pressure foot up. This process applies to the rest of your work.
A smooth finish is a must
A plane can get destroyed in seconds when the landing is not appropriate. When your imagination would come in front of your eyes, it would be time to remove the hoop. Not maintaining this step carefully can ruin your work of hours. Remove the fabric out of the machine carefully and cut off the excess. Spray the paper with water and cut off the extra thread.
Conclusion
Following the mentioned process with great care and effort, you would find yourself making some quality monogram with just an ordinary sewing machine. However, it may not come out really great at the first attempt. But practice makes a man perfect.
Following the process, a few more times will help you to get a better finish. Remember, patience is the key to achieve absolute perfection. Dedication, practice, patience and you are ready to get the professional results with your very own ordinary sewing machine.